Required Tool List
| REQUIRED FOR GENERAL | REQUIRED FOR AIRFRAME | REQUIRED FOR POWERPLANT |
|---|---|---|
| (1) Diagonal cutters (dykes) | All items on required for General list plus: | All items on required for General list plus: |
| (1) Slip Joint pliers | (1) O.S.H.A approved respirator (see instructor) | (1) Socket set 3/8" drive 12 point, deep-well 3/8" thru 9/16" |
| (1) Duck billed pliers | (1) Welding goggles (shade 5 and 10) | (1) Socket set 3/8" drive 12 point, shallow 3/8" thru 9/16" |
| (1) Needle nose pliers 6" | (5) #40 drill bit | (1) Socket set 1/4" drive 12 point, deep well 3/16" thru 11/32" |
| (1) Combination wrench set (1/4" thru 7/8") | (5) #30 drill bit | (1) Socket set 1/4" drive 12 point, shallow 3/16" thru 11/32" |
| (1) Open-end wrench set 3/8" thru 7/8") | (5) #21 drill bit | (1) Deep set, 1/2" drive, six point, 7/8" socket |
| (1) SAE Allen wrench set | (2) chemical gloves | (1) 3/8" to 1/2" adapter |
| (1) SAE Ignition wrench set | (1) Feeler gauge set (.015 thru .035) | (1) 3/8" drive ratchet |
| (1) Philips #1 tip screwdriver | (1) Ball peen hammer (12 oz.) | (1) Smooth jaw channel locks |
| (1) Philips #2 tip screwdriver | (1) Pair of welding gloves | (1 set) 3/8" - 7/8" crowfoot wrench set |
| Set of screwdrivers (straight 4",6",8") | (1) HVLP spray gun (see instructor) | (1) Smooth face rubber mallet |
| (1) Philips/common offset screwdriver | (1) 3/32" pin punch | |
| (1) Steel ruler - 6" | (1) 1/8" pin punch | |
| (1) Flashlight | (1) 5/32" pin punch | |
| (1) Stick-type magnet | (1) Shop coat or coveralls (optional) | |
| (1) Inspection mirror | 10' or 12' tape measure | |
| (1) Mechanical fingers | (1) Safety wire pliers | |
| (1) Ratchet-1/4" drive | ||
| (1) Set of standard sockets (1/4" thru 9/16") | ||
| (1) Set of 1/4" deep-well sockets (1/4" thru 9/16") | ||
| (1) Adapter socket (3/8" to 1/4") | ||
| (1) Adapter socket (1/4" to 3/8") | ||
| (1) Center punch (non-automatic) | ||
| (1) O.S.H.A. approved respirator | ||
| (1) O.S.H.A. approved safety glasses | ||
| (1) O.S.H.A. approved hearing protection | ||
| (1) Toolbox (carry- no roll-away) | ||
| (1) Minimum TI-30 calculator or equivalent |
Note: Tool lists are subject to change upon Aviation Maintenance Technology Faculty approval. Updates announced in course orientations.
